Professional Instruments and Polishing Compounds™ Since 1981

1- Item to be polished must be free of any dirt or debris. If polishing an acrylic watch crystal, inspect the crystal for cracks or breakage as the cream could possibly get in and be difficult to get out.
2- Dab a small amount of the CrystalClear Polishing Cream™ on the yellow buffing pad provided. Using a fast circular motion, float the pad over the area to be polished. This step may be repeated as needed or until a high gloss is achieved and may take 2 or 3 minutes of polishing, depending on the deepness of the scratch or blemish.
3- Wipe clean with any cotton cloth or rinse with warn soapy water if desired.

* Not for use on metals with a brushed finishes as it may remove the finish and leave a mirror shine. Please see our CrystalClear brush satin formula * Will not remove deep scratches or gauges.

1- Apply a small amount of the special Metallux Polish™ on a clean cotton cloth. Using a circular motion, rub the cream over the area to be polished. This step may be repeated as needed or until a high gloss is achieved and may take 2 or 3 minutes of polishing, depending on the condition of the item being polished.
3- Wipe clean with any cotton cloth or rinse with warn soapy water if desired.

* Stir or shake jar if cream should become separated. Store at room temperature.

1- Dab a small amount of the Brush Satin Cream™ on an old tooth brush, nail cleaning/manicure brush or use the yellow buffing pad provided for larger surfaces. (A tooth or nail brush is recommended for a better finish on smaller surfaces, like watches, jewelry, etc.) Brush in the direction of the existing finish or direction where brushed finish is desired but (not in a circular motion) as this may affect the final finish. This step may be repeated as needed or until a brushed look is achieved. It may take 2 or 3 minutes of polishing depending on the deepness of the scratches and blemishes to be removed or degree of finish desired.
2- Rinse with warm soapy water then wipe clean with a cotton cloth in the direction you have just finished brushing. This will remove any excess cream that may be left in small cracks.

* If cream becomes dry in the jar or while in use simply add a few drops of water to the mixture or brush. Store at room temperature * Will not remove deep scratches or gauges.

1- Item to be protected must be dry & free of any dirt or debris.
2 - Apply a small amount of the Reveal Formula™ on a clean cotton cloth. Wipe on, allow to penetrate and let dry thoroughly (Preferably over night) The Reveal Formula™ will go on milky white. However, it will dry clear.

* Can be diluted almost two to one by mixing with water. However, it is recommended for use at full strength for maximum protection.

(1) Hand or machine wash the cloths in warm or hot water. Washing in hot water makes the cloths swell, releasing trapped dirt and particles.
(2) Air dry or tumble dry low.
(3) Do not use bleach!
(4) Do not use fabric softeners!
(5) Do not wash with terry towels, or articles that "shed" a lot of lint.